Does Paint Look Patchy When Drying? [Solved!]

When paint dries, it can look patchy. This is usually due to one of three things: the paint was applied too thin, the surface wasn’t properly prepared before painting, or the wrong type of paint was used.

  • If the paint was applied too thin, this would cause the underlying surface to show through and create a patchy appearance. To avoid this, be sure to apply enough paint so that it provides even coverage without being too thick.
  • If the surface wasn’t properly prepared before painting, this can also cause the new paint to look patchy. Be sure to clean and sand the surface thoroughly before applying any new paint. If you’re painting over a dark color with a light one, you may also need to prime the surface first in order to achieve even coverage.
  • Using the wrong type of paint can also result in a patchy finish. Make sure you select a paint that is appropriate for the job at hand and that will adhere well to the specific type of surface you’re working with.
  • As a bonus tip, don’t apply too much paint to your brush at once. Make sure you paint in long strokes rather than short strokes, and don’t forget to let the first coat of paint dry completely before adding a second coat.

By following these tips, you should be able to avoid having your paint look patchy when it dries! 

Reasons Why Your Freshly Painted Wall Is Blotchy

If you’ve just painted a wall in your home and it’s looking blotchy, there are a few things that could be causing the problem. It’s important to identify the cause so that you can fix it and avoid any further issues.

One possible reason for blotchy paint is that the paint was not mixed properly before application. If the paint is not thoroughly mixed, the pigments can settle unevenly on the wall, resulting in an uneven appearance.

Another possibility is that the wall was not prepared correctly before painting. If there is dirt or grease on the surface, it can prevent the paint from adhering evenly, which will also cause blotches.

If you’re unsure of what might be causing your newly painted wall to look blotchy, try taking a close look at it in natural light. This will help you to better see any imperfections in the paint job. Once you’ve identified the cause of the problem, take steps to fix it so that your next paint job will turn out flawless!

Still Patchy Even After Four Coats of Paint?

It can be so frustrating when you paint a room and it turns out patchy. You may have even used four coats of paint and yet the problem persists. There are two main reasons why your paint may appear patchy even after multiple coats have been applied.

It could be that you didn’t prep the surface properly before painting, or that you’re using a low-quality paint. If the latter is the case, then switching to a better quality paint should solve the problem. If you did prep the surface but it’s still not giving you even coverage, then it’s likely that your walls have an uneven texture. This can happen in older homes, especially if the walls haven’t been properly maintained over time.

Does Paint Look Patchy When Drying?


Fixing a Patchy Paint Job

It’s inevitable. If you aren’t a professional painter but love painting walls yourself, you’ll most likely end up with a patchy paint finish. Maybe it’s just a small section, or maybe the entire wall is affected. Either way, it’s not what you were going for. The good news is that, in most cases, you can fix a patchy paint job by using a little more paint.

When Patchiness Includes Thicker Areas of Paint

A roller will often leave behind thicker lines on the edges as you roll it to paint the walls. Also, it’s not easy to avoid the drip of excess paint from the roller onto the wall all the time. In most cases, a gentle sanding with a fine grit sandpaper will even out such thicker paint areas. But before you do this, let the paint dry first. After sanding, make sure to wipe off any dust from the wall so that it ends with a smooth finish. Finally, repaint the affected area.  

When Patchiness Affects Just a Few Areas

If you’re working on a fresh paint job and spot a few uneven areas as you finish painting, you may only need a touch-up, otherwise called spot painting. Wait until the paint has dried before doing your spot painting to avoid ruining the existing paint. Apply an additional coat of paint on those areas until the edges are feathered and they look even with the rest of the paint. 

When Patchiness Affects the Whole Area

If the patchiness covers a significant portion of the room or the entire space, doing another coat over the entire room will yield better results. Widespread patchiness typically indicates that you applied fewer coats than necessary. Load your rollers with paint that is just enough to go over with an additional coat. Allow the new coat of paint to dry completely. Now check the painted surface from various angles and in various lighting conditions to determine if you have achieved the desired coverage. If you find that the coverage is still insufficient, consider adding another layer.

Stop Patchy Paint When Using a Roller

  • In order to avoid patchy paint when using a roller, first make sure that you’re using the right type of roller for the application. If you’re using latex paint, using a roller with a synthetic (polyester or nylon) roller cover is recommended. For oil-based paints, use a roller with a natural fiber roller cover (made from mohair or a blend of polyester and lamb’s wool).
  • Second, always roll the paint in one direction and don’t go back over areas that you’ve already painted. This will help prevent streaks and uneven coverage.
  • Third, load your roller with enough paint so that it’s slightly dripping when you start painting. Then, roll it out on a piece of cardboard or newspaper before applying it to the wall. This will help remove any excess paint and prevent drips.
  • Finally, resist the temptation to “touch up” areas that look like they need more coverage. Once you’ve rolled out an area, leave it alone! Going back over it will only make things worse.

Leave a Comment